Ricoh A850 Operating Instructions Manual page 89

Important
The procedures written in this manual assume that you are a network admin-
istrator. If you are not, be sure to consult your network administrator before
configuration.
Changing the zone
It may be necessary to change the zone configuration.
Use applications such as Apple Printer Utility or LaserWriter Utility to change
the zone configuration in the Macintosh EtherTalk environment. These utilities
are distributed by Apple Computer, Inc.
Follow these steps to use the Apple Printer Utility.
A Insert the CD-ROM into the CD-ROM drive.
B Copy the "Zone Name.ps" file in the "Zone Name" folder to the hard disk.
C
Open the copied "Zone Name ps" file using a text editor, and change "New-
Zone" , which is in the second line from the bottom, to the name of the new
zone.
%!PS-Adobe2.0 %%
Title: Changing Zone (EtherNet only)
%%CreationDate: Tue Dec 16 1997
%%EndComments
true 0 startjob not {ERROR}if
(%EtherTalk%) << /EtherTalkZone (NewZone) >> setdevparams
%%EOF
D Save "Zone name.ps".
E
Run the Apple Printer Utility, and select the printer for which the new zone
name is to be used.
F Select [Send PostScript File] in the [Utilities] menu, and send "Zone name.ps" to
the printer.
Macintosh Configuration
Draft 2000/04/28
19