Cleaning The Printhead - Pitney Bowes AddressRight 200 User Manual

Cleaning the Touchscreen
Carefully clean the touchscreen by wiping with a lint-free cloth and a non-abrasive cleaner made for
touchscreens on computers and cell phones. DO NOT spray cleaner directly on screen. Spray on
cloth, then clean screen.

Cleaning the Printhead

Maintain good print quality by keeping printheads clean. During printing, ink spray, paper fibers, and dust
build up on the printheads. This buildup eventually degrades print quality. If you notice problems with
print quality, or to prevent a buildup from occurring, wipe the printhead with a wet fiberless, lint-free cloth.
Cloth should be:
a Soft
a Fiberless, lint-free
a Moistened with water
(Distilled is best but tap water works)
Wipe slowly across the long axis with the printhead facing down (as shown). DO NOT apply excessive
force, as this could scratch the nozzle area.
Pitney Bowes User Guide
Cloth should not be:
r Abrasive
r Made of small fibers
r Dry or contain chemical additives
November 2019
Maintenance
43