Menus and Options
Quick Menu
The Quick Menu button provides access to frequently-used printer functions. To open, press the Quick
Menu button on the Control Panel. To close, press the Quick Menu button again.
Test Feed/Reprint: The default is Test Feed. If no data is present, this button allows you to test feed
blank sheets of media. If there is a printer jam or double feed, the Test Feed button becomes Reprint,
which allows you to recover missed or misprinted pieces. Use the arrows to go back to the initial
misprinted piece (or further back if desired) to start reprinting. Press Print to start printing.
Purge Print: Prints an ink pattern at 600 dpi to clear all of the ink nozzles in all of the ink cartridges
Horizontal Alignment - Heads (1-6):Adjust offset of individual printheads (side-to-side) up to ±100.0
microns in 5.0 micron increments.
Vertical Alignment - Heads (2-6):Disables the top nozzles in individual printheads to reduce nozzle
overlap. Adjust up to ±1.0 microns in 0.1 micron increments.
Printer Preferences: Sets printer features including Purge First Piece, Automatic Feed Start, Keep
Nozzle Alive, Tray Break, Continuous Batch Counter, Feeder Delay, and Invert Printing.
Ink Status: Shows the percentage of ink remaining in each ink cartridge and the estimated number of
prints remaining at the selected resolution.
Pitney Bowes
User Guide
November 2019
28