Siemens SIMATIC ET 200pro Series Operating Instructions Manual page 123

Procedure
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
STARTER has templates in German and English.
2. Select the suitable template and create a report for each drive of your machine or system:
– Template for the machine documentation:
– Report of the settings for the basic functions, as of firmware version V4.4:
3. You load the created reports for archiving and the machine documentation for further
processing:
4. Archive the reports and the machine documentation.
You have generated the documents to accept the safety functions.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
de_G120x_Basic_V4.4...: German report.
en_G120x_Basic_V4.4...: English report.
Acceptance tests for the safety functions (Page 257)
Advanced commissioning
7.7 Safe Torque Off (STO) safety function
123