Unit Assembly Prior To Installation - Regency Grandview G800C Owners & Installation Manual

installation

Unit Assembly Prior to Installation

After the framing has been built, the nail-
ing Flanges will need to be set depending
on the depth of finishing material being
used. Up to 11/4" total material thickness
can be used, including the backing mate-
rial. The depth of finishing material can be
adjusted in 1/4" increments.
1. Determine the required depth set-
ting for the materials being used.
2. Once the setting has been chosen,
install the Left and Right Nailing
Flanges with 2 screws on each
Flange.
|
36
Grandview® G800C Gas Fireplace
Left Nailing Flange
Nailing Flange Parts
Finishing
Material
Depth
11/4" 3/4"
1" 1/2"
Front of Fireplace
Right Nailing Flange
Standoff Deflector
Top Nailing Flange
Flush
1/4"
Setting