Regency Grandview G800C Owners & Installation Manual page 33

Faceplate - Finishing:
A 1/2" gap must be maintained on the sides of
the fireplace to allow the Face Plate to be in-
stalled and removed.
Do NOT finish past the front face of the fireplace.
Top View
Mounting
Tab Folded
forward
Face Plate
"
3
4
Framing
Nailing Flange
folded forward
Nailing Flange
Tabs folded
forward
Mounting Tabs
folded forward
Critical Finishing Gap
Install the Face Plate by resting the arms on the
Face Plate on top of the mounting tabs.
Adjust left and right to center the Face Plate.
NOTE: Do not to touch the Face Plate without
clean, soft, gloves. Dirt or oils can be transferred
onto the finish and become permanent.
installation
Grandview® G800C Gas Fireplace
| 33