LED status
Off
SFP port LED
Table 35 SFP port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off
Management Ethernet port LEDs
The switch provides two status LEDs LINK and ACT for the copper management Ethernet port and
one double-color LED LINK/ACT for the fiber management Ethernet port.
Table 36 Copper management Ethernet port LED description
LED mark
LINK
ACT
Table 37 Fiber Management Ethernet port LED description
LED mark
LINK/ACT
Fan tray alarm LEDs
The X712 Bck(pwr)-Frt(prt) HV2 fan tray, X711 Frt(prt)-Bck(pwr) HV2 fan tray, 5930 4-slot F(prt)
B(pwr) Fan Tray and 5930 4-slot B(pwr) F(prt) Fan Tray each provide an alarm LED.
Description
No transceiver module or network cable has been installed or no link is present
on the port.
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 100 Mbps.
The port is sending or receiving data at 100 Mbps.
No transceiver module or cable has been installed or no link is present on the port.
Status
Description
Off
No link is present on the port
Steady green
The port is operating at 10/100/1000 Mbps.
Off
The port is not receiving or sending data.
Flashing yellow
The port is sending or receiving data.
Status
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Description
No link is present on the port.
The port is operating at 1000 Mbps.
The port is receiving or sending data at 1000 Mbps.
The port is operating at 100 Mbps.
The port is receiving or sending data at 100 Mbps.
62