Network Settings; General Settings - Avaya Vantage Installing And Administering

Supported configuration parameters
Parameter
ADMINTIMEFORM
AT

Network settings

The following sections describe network configuration settings, such as Ethernet, VLAN, QoS, and
IEEE 802.1X.

General settings

Parameter
IPADD
May 2018
Type Default Is set to
value default
on reset
Integer 0 No
Type Default Is set to
value default
on reset
String 0.0.0.0 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• The SET command in the 46xxsettings.txt
file.
With IP Office, set this parameter in the
46xxspecials.txt file.
Specifies whether Avaya Vantage
hour or 24-hour time format. The options are:
• 0: Use the 12-hour time format.
• 1: Use the 24-hour time format.
™
Avaya Vantage uses the selected time format in all
areas that displays time, including the top bar, call
log, and calendar.
For provisioning, use the SET command in the
46xxsettings.txt file.
This parameter is supported in all modes.
Description
Specifies the IP address of the Avaya Vantage
device. The range is from 7 to 15 ASCII characters.
This is a testable parameter.
The parameter can be used in conditional
statements in the 46xxsettings.txt file.
This parameter is supported in all modes.
For provisioning, use:
• The yiaddr field value in the DHCPACK message.
™
™
uses the 12-
™
Table continues...
100