Avaya Vantage Installing And Administering page 151

Parameter
PHNREMOVEARE
ACODE
DIALPLANLOCAL
CALLPREFIX
DIALPLANNATION
ALPHONENUMLE
NGTHLIST
DIALPLANEXTEN
SIONLENGTHLIST
DIALPLANPBXPR
EFIX
May 2018
Type Default value Is set to
String 0
String 0
String Null string
String Null string
String Null string
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Avaya Breeze
Description
default on
reset
• 1: To enable the logic. The PHNOL code
is appended to numbers that are shorter
than the shortest extension length.
Yes Specifies whether the area code must be
removed for local calls.
This parameter is obsolete. While it is still
supported for backward compatibility,
Avaya recommends you to use the newer
parameter,
DIALPLANLOCALCALLPREFIX.
Yes Indicates whether the area code must be
removed for local calls. Assign one of the
following values:
• 0: To disable the removal of area code for
local calls.
• 1: To enable the removal of area code for
local calls.
Note:
Area code is configured using
DIALPLANAREACODE.
Yes Specifies a list of national phone number
length (PHNLDLENGTH) values separated
by commas.
This parameter takes precedence over
PHNLDLENGTH.
Example:
SET
DIALPLANNATIONALPHONENUMLENGTHLI
ST 10,11
Yes Specifies a list of internal extension length
(PHNDPLENGTH) values separated by
commas.
This parameter takes precedence over
PHNDPLENGTH.
Example:
SET DIALPLANEXTENSIONLENGTHLIST
7,8
Yes Specifies the PBX main prefix.
™
CSDK parameters
Table continues...
™
151