Avaya Vantage Installing And Administering page 96

Supported configuration parameters
Parameter
AUDIOSTHD
AUDIOSTHS
May 2018
Type Default Is set to
value default
on reset
Numeric 0 Yes
Numeric 0 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• The Settings > Audio settings > Auto gain
control (AGC) > Speaker Auto Gain Control
menu on the device.
This parameter can be stored on the PPM or
backup server.
Specifies headset sidetone settings. The options
are:
• 0: Normal level.
• 1: Three levels softer than normal.
• 2: Off (inaudible).
• 3: One level softer than normal.
• 4: Two levels softer than normal.
• 5: Four levels softer than normal.
• 6: Five levels softer than normal.
• 7: Six levels softer than normal.
• 8: One level louder than normal.
• 9: Two levels louder than normal.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies handset sidetone settings. The options
are:
• 0: Normal level.
• 1: Three levels softer than normal.
• 2: Off (inaudible).
• 3: One level softer than normal.
• 4: Two levels softer than normal.
• 5: Four levels softer than normal.
• 6: Five levels softer than normal.
• 7: Six levels softer than normal.
• 8: One level louder than normal.
• 9: Two levels louder than normal.
™
Table continues...
96