Connecting Avaya Vantage ™ To The Network - Avaya Vantage Installing And Administering

• 802.3at PoE (Class 4)
• 48 Vdc power supply
If you use the 802.3at networking switch or the power adapter, Avaya Vantage
up to 500mA. If you use the 802.3af networking switch, Avaya Vantage
100mA.
You can use a 48 volt, 30 watt power adapter to power Avaya Vantage
conditions:
• You are using Wi-Fi to connect to the network instead of using an PoE networking switch
port.
• The networking switch port does not support the 802.3af or 802.3at PoE specification.
• The device requires more power than 802.3af and 802.3at PoE switch port is not available.
For example, when a USB device that requires more than 0.5 watt is connected to Avaya
™
Vantage and only 802.3af PoE ports are available, Avaya Vantage
power adapter.
You must purchase the power adapter separately.
™
If Avaya Vantage
then the following occurs if one of the power sources is disconnected:
• If the power adapter is disconnected, Avaya Vantage
supports either the 802.3at or 802.3af specification, Avaya Vantage
the reboot.
• If the networking switch is disconnected, Avaya Vantage
™
If Avaya Vantage
connected, Avaya Vantage
Connecting Avaya Vantage
About this task
You can connect Avaya Vantage
Procedure
1. (Optional) Connect a power adapter to the 48-V DC power connector at the back of Avaya
™
Vantage and plug the power adapter into an electrical outlet if:
• Your network does not support the 802.3at (PoE) or 802.3af (PoE) injector specification.
• You want to use a Wi-Fi connection.
2. To use a wired Ethernet connection:
a. Plug one end of an Ethernet cable into the LAN connector at the back of Avaya
Vantage
May 2018
is connected to both a 48 Vdc power supply and a PoE networking switch port,
is connected to the PoE networking switch and the power adapter is
™
continues to work without a reboot.
™
to your network using a wireless or an Ethernet connection.
™
.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Connecting Avaya Vantage
™
reboots. If the networking switch
™
continues to work without a reboot.
™
to the network
™
to the network
™
USB port delivers
™
USB port delivers up to
™
in the following
™
must be connected to a
™
continues to work after
™
29