3. Pull the top of the cover (B) out and away from the system.
Figure 140. Remove the door from the model
4. Gently pull the cover up and off the base.
Installing the front cover on a stand-alone 8203-E4A, 8204-E8A,
8261-E4S, 9407-M15, 9408-M25, or 9409-M50
Use this procedure to install the cover after accessing components or performing service.
1. Place the two lower cover-locking tabs into the retaining slots located on the base of the system unit
as shown in the following figure.
149
Chapter 13. Removing and replacing covers and doors