Table of Contents
Advertisement
Figure 142. Front cover on a model 7314-G30 or 5796
3. Push the cover onto the chassis and release the latches. The cover should securely snap into place.
4. Replace the two thumbscrews (B) into the slots on the left and right of the front cover.
Removing and replacing the front cover for the 8234-EMA, 9117-MMA,
or 9406-MMA
Use these procedures to remove and replace the cover to access components or perform service.
Removing the front cover from the 8234-EMA, 9117-MMA, or 9406-MMA
Use this procedure to remove the cover to access components or perform service.
To remove the front cover follow these steps:
1. If necessary, open the front rack door.
2. Loosen the thumbscrew on the right side of the cover as shown in the following figure.
151
Chapter 13. Removing and replacing covers and doors
Hide quick links:
Advertisement
Table of Contents
