Chapter 6. Installing the rack security kit
You might need to install the rack security kit. Use the procedure in this section to perform this task. This
section also includes illustrations of the related hardware components and shows how these components
relate to each other.
To install a rack security kit (feature 6580) that consists of the security lock and security slide bars,
complete the following procedure:
1. Read the "Rack safety notices" on page 106.
2. Verify the inventory in the rack security kit.
v
Figure 110. Rack security kit inventory
3. Remove the existing door latch.
© Copyright IBM Corp. 2007, 2009
1
Two lock hardware kits. Each kit contains:
- Rack lock
- Bracket
- Screw
- Two keys
2
Two security slide bars
3
Two locked/unlocked stickers
109