Hardware Configuration And Assembly; Hardware Configuration And Assembly - Siemens SIWAREX MS Device Manual

Hardware Configuration and Assembly

4 Hardware Configuration and Assembly

!
Warning Notes
For configuration, assembly and commissioning, the definitions from the manual for
the SIMATIC S7-200 are applicable. This chapter provides you with additional
information for hardware configuration and assembly, and for preparing the
SIWAREX MS for operation.
The technical safety information is to be strictly adhered to.
!
Warning
Unqualified intervention in the device/system or not adhering to the warning notices
can result in serious injury or damage to equipment. Only qualified personnel are
permitted to access the operational components of this device / system.
!
Warning
The unit has been developed, manufactured, tested and documented in
accordance with the corresponding safety standards. The device itself will not
cause any danger to equipment or personal health under normal circumstances.
!
Danger
Commissioning is not permitted until it is guaranteed that the machine in which
these components are to be integrated conforms with the guidelines in
89/392/EWG (within the European Union).
4-8 SIWAREX MS