Siwarex Ms Getting; Step 7-Micro/Win Program; Operating And Monitoring For Tp 177Micro Based On Wincc Flexible; Figure 8-8 Program Calls In Project Siwarex Ms Getting Started - Siemens SIWAREX MS Device Manual

Programming in STEP 7-Micro/Win
8.7 SIWAREX MS Getting Started
SIWAREX MS Getting started is "ready to use" application software for a scale. It consists of a
project with the following programs:
8.7.1

STEP 7-Micro/Win Program

The project has the name: SIWAREX_MS_Getting_Started_TP177micro.mwp.
The MicroScale library and a utility program are called up in the program.
Figure 8-8 Program calls in project SIWAREX MS Getting started
8.7.2

Operating and Monitoring for TP 177Micro Based on WinCC Flexible.

WinCC flexible of at least edition 2005 + HF1 is required for the programming.
In the image for the scale display, the weight value, the status information and the messages
are displayed. To load the image into the operating unit, you must have the WinCC flexible
software.
8-50 SIWAREX MS