Siemens SIWAREX MS Device Manual page 63

Accessories
The remote digital displays can be connected directly to the
SIWAREX MS via a TTY interface. Usable remote displays: S102
Siebert Industrieelektronik GmbH
Postfach 1180
D-66565 Eppelborn
Tel.: 06806/980-0
Fax: 06806/980-999
Internet: http://www.siebert.de
For detailed information, please contact the manufacturer.
SIWAREX JB connection and distribution box
for parallel load cell switching
SIWAREX EB expansion box
to extend load cell cable
Ex interface, Type SIWAREX Pi
without ATEX certification
for intrinsically safe connection of load cells, suitable for
SIWAREX MS, U, M, FTA, FTC and P weighing modules.
With UL and FM certification
SIWAREX Pi Ex interface device manual
Ex interface, Type SIWAREX IS
with ATEX certification
for intrinsically safe connection of load cells, including device
manual, suitable for weighing modules SIWAREX MS, U, M, FTA,
FTC and P.
Without UL and FM certification
with short-circuit current < DC 199 mA
with short-circuit current < DC 137 mA
Cables (optional)
Cable Li2Y 1 x 2 x 0.75 ST + 2 x (2 x 0.34 ST) - CY
for connection of SIWAREX MS, U, M, FTA, FTC, P with
connection and junction box (JB), expansion box (EB) or Ex
interface (Ex-I) and between two JBs, for stationary installation,
occasional bending is possible
10.8 mm outer diameter
for ambient temperature –20 to +70°C
Cable Li2Y 1 x 2 x 0.75 ST + 2 x (2 x 0.34 ST) - CY, blue cover 7MH4 702-8AF
SIWAREX MS 10-55
7MH4 710-1BA
7MH4 710-2AA
7MH4 710-5AA
C71000-T5974-C29
7MH4 710-5BA
7MH4 710-5CA
7MH4 702-8AG