Register No. Setting (Submode 43); Plu Stock Loading Or Changing (Submode 90) - TEC MA-1535 series Owner's Manual

4. PROGRAMMING OPERATIONS

4.21 Register No. Setting (Submode 43)

4-digit numbers can be set as Register ID No. Once set, it will be printed on journal and every receipt.
CONDITION
OPERATION
43 [#/NS]
Example) To set 1234 as Register No.
Key Operation: Control Lock: SET, Enter 43 and depress the [#/NS] key.
[0] [1] [#/NS]
[1] [2] [3] [4] [AT/TL]

4.22 PLU Stock Loading or Changing (Submode 90)

This Submode loads or changes the stock quantities of PLUs.
CONDITION
OPERATION
90 [ST]
NOTE: PLU programming should be done before this operation.
Example) To change the stock quantity of the following PLU.
Key Operation: Control Lock: X or Z, Enter 90 and depress the [ST] key.
1000000010101
[R/A] or [LOAN]
Anytime outside a sale
Control Lock: SET
01 [#/NS]
Fixed
[#/NS] (To complete this submode.)
Anytime outside a sale
Control Lock: X or Z
|PLU Code| [PLU] |Stock Quantity|
(PLU Code)
[PLU]
20 (Stock Quantity)
(When adding the stock quantity.)
[ST] (To complete this submode.)
|Register No.| [AT/TL]
4 digits (0000 to 9999)
Repeat for other PLUs.
(0.001 to 9999.999)
4-28
4.21 Register No. Setting (Submode 43)
[#/NS]
TEC
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002
PRG
01-01
0046
[R/A] or [LOAN]
(When adding the
stock quantity.)
[PO] or [PICK-UP]
(When subtracting
the stock quantity.)
EO1-11148
STORE
#0000
43
1234
15:37TM
[ST]