Plu Preset-Code Key Setting (Submode 27) - TEC MA-1450-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
ex.) To set the following Link-PLU Table and its Sub-link PLU:
Link-PLU Table No.
1
Mode Lock: SET, 25 [@/FOR]
1 [ST] 101301 [PLU] [AT/TL]
NOTE: In this example, Link-PLU Table No. has
already been set in PLU 90601 (Coke Small-B)
and PLU 90701 (7-up Small-B) as Head-link
items in the PLU PROGRAMMING operation,
Submode 4, The Sub-link PLU 101301 here
has been programmed as a bottle-deposit PLU
(Small-Btl Depo) in the same submode.
Deletion of Link-PLU Tables
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
25 [@/FOR]
6.16

PLU PRESET-CODE KEY SETTING (Submode 27)

When there are any keys programmed as PLU Preset-code Keys on the ECR Keyboard (Ordinary or Flat Type),
and/or when the PLU Keyboard PK-2 (hardware option) is connected to the ECR, a PLU code may be preset to
each of those keys in this operation.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
27 [@/FOR]
Sub-link PLU Code
101301
[ITEM CORR]
or
[VOID]
Repeatable for other tables to be deleted.
|PLU Code|
Enter through Numeric
Keys on the ECR Keyboard
(Enter 0 to close the key);
Max. 6 digits
Repeat for other keys.
6.16 PLU PRESET-CODE KEY SETTING (Submode 27)
|Link-PLU Table No.| [ST]
[KEY]
Depress the required key
on the ECR Keyboard or
on the PK-2 Keyboard.
6-29
EO1-11095
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #3001
P25
#01 101301
0055
[AT/TL]
[AT/TL]