Error Messages - TEC EO1-11099 Owner's Manual

<Satellite Terminals or Backup Master Terminal>
• IN-LINE Lamp
1) Illuminated during "HOLD" condition
2) Extinguished after completing in-line services
3) Blinking during in-line services

Error Messages

The following table shows the Error Messages to be displayed on in-line terminals, in additions to
those displayed on Standalone ECRs.
Error Message
(Sandard Setting)
FILE BUSY
IRC CONNECT ERR
IRC ERROR
MASTER IS BUSY
PLEASE BACK UP
RKP BUFFER FULL
IN-LINE ERROR MESSAGE TABLE
(to be added to the table for the Standalone Level)
Cause of Error
A designated file is already occupied by other terminal.
Ternsmission cannot be executed due to the connection error (Disconnection
of the line, or Master Terminal's power is OFF, etc.)
RKP Transmission Error (Data cannot be transmitted from the Satellite
Terminal to the Master Terminal.)
An inquiry file is being used.
RTR Declaration can not be canceled due to the Backup Error.
RKP pool buffer of the Master Terminal or the Backup Master Terminal is full.
– 4 –
EO1-11113