TEC EO1-11099 Owner's Manual page 178

Report Name
PLU REPORTS
• All PLU Read:
• All PLU Reset:
• Zone PLU Read:
• Zone PLU Reset:
• Individual PLU Read:
• Inactive PLU Read:
PLU GROUP REPORTS
• PLU Group Read:
• PLU Group Reset:
ORDER TABLE REPORTS (for the drive-through
spec. only)
• All Order Tacles Read
• All Order Tables Reset
CUSTOMER FILE REPORTS
(for Check Track Memory type only)
• All Files Read
• All Files Reset
• Zone Files Read
• Zone Files Reset
• Individual File Read
• Zero-balance Files Read
• Credit-balance Files Read
• Debit-balance Files Read
NOTE: When the "Process Report" is marked, the report can only be taken after taking another
report which consolidates the corresponding data to be based on. For further details,
see the table and descriptions on the next page.
TABLE OF IN-LINE REPORT OPERATIONS (continued)
RTR Declaration : ON
Daily
GT
Daily
GT
Daily
GT
Daily
GT
Daily
GT
Daily
GT
Daily
GT
Daily
GT
Mode
Lock
X 13 [AT/TL]
X 213 [AT/TL]
Z 13 [AT/TL]
Z 213 [AT/TL]
X 13 [#]
[@/FOR]
X Start with 213 instead of 13 in the above
pattern.
Z 13 [#]
[@/FOR]
Z Start with 213 instead of 13 in the above
pattern.
X (Process Reports; NOTE below)
13 [#]
X Start with 213 instead of 13 in the above
pattern.
(Process Reports; NOTE below)
X 13 [#]
X Start with 213 instead of 13 in the above
pattern.
X 24 [AT/TL]
X 224 [AT/TL]
Z 24 [AT/TL]
Z 224 [AT/TL]
X 15 [AT/TL]
Z 15 [AT/TL]
X 15 [AT/TL]
Z 15 [AT/TL]
X 15 [#]
[@/FOR] | Zone-end File Code | [AT/TL]
Z 15 [#]
[@/FOR] | Zone-end File Code | [AT/TL]
X
15 [#]
X 15 [#]
X 15 [#]
X 15 [#]
- 11 -
Key Operation
| Zone-start PLU Code |
| Zone-end PLU Code | [AT/TL]
| Zone-start PLU Code |
| Zone-end PLU Code | [AT/TL]
| PLU Code | [PLU] ([ST]) [AT/TL]
Repeat for required PLUs.
0 [AT/TL]
| Zone-start File Code |
| Zone-start File Code |
| File Code | [@/FOR]
0 [AT/TL]
1 [AT/TL]
2 [AT/TL]
EO1-11113
[AT/TL]