Error Item Name Programming - TEC MA-600 Series Programming Manual

6. TERMINAL FILE PROGRAMMING
6.17

Error Item Name Programming

Error item names to be displayed on the LCD display are programmed here. A maximum of 16 one-byte
characters by 2 lines can be programmed.
CONDITION
OPERATION
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key eight times then
Select an error code of which error item
name is to be programmed with the [↑]
Input an error item name.
NOTES:
1. A maximum of 16 one-byte characters can be programmed as the error item name for each error code.
Enter all the characters in regular size.
2 As shown in the table on the following pages, the standard program data are preprogrammed (which is auto-
set after a RAM Clear). Therefore, program only the error item names that need to be changed.
Any time outside a sale
Mode Lock: SET
Main Menu
or
Depress [2].
[Enter] key.
or
Depress [9].
or [↓] key.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" is selected.
"9 ERROR ITEM NAME" is selected.
The error item name already programmed is displayed.
The ECR enters character input mode.
A maximum of 16 one-byte characters are input.
The error item name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-87
EO3-11106
6.17 Error Item Name Programming
A long receipt is issued and the