If the tire is inflated to more than the recommended level
1
Disconnect the hose from the valve.
2
Install the air release cap to the end of the
hose and push the protrusion on the air
release cap into the valve to let some air
out.
3
Disconnect the hose from the valve, remove the air release cap from the hose
and then reconnect the hose.
4
Turn the compressor switch on and wait for several seconds, then turn it off.
Check that the air pressure indicator shows the recommended level. (P. 645)
If the air pressure is lower than the recommended level, turn the compressor
switch on again and repeat the inflation procedure until the recommended pres-
sure is reached.
WARNING
Precautions for use of the sealant
Ingesting the sealant is hazardous to your health. If you ingest sealant, con-
sume as much water as possible, then immediately consult a doctor.
If sealant gets in eyes or adheres to skin, immediately wash it off with water.
If discomfort persists, consult a doctor.
CT200h_OM_OM76102E_(EE)
8-2. Steps to take in an emergency
617
8