Lexus CT200H Manual page 256

256
4-5. Using the driving support systems

Display mode
The rear view monitor display mode can be adjusted when the power
switch is in ON mode and the shift position is in R.

To select a display language (English, French or Spanish).
1
Push and hold the "AUTO" button for 6 to 12 seconds.
The monitor should turn on and the indicator should turn green.
2
Push the "AUTO" button.
3
Each time the "AUTO" button is pushed and released, the lan-
guage will change.
The warning message should flash 5 seconds after the button is
released, indicating that the change has been completed.

To permanently disable the monitor.
Push and hold the "AUTO" button for 12 to 15 seconds.
The monitor will turn off and on after 6 seconds. Continue holding
the button down until the display turns back off.
The indicator should flash orange.
The monitor will not automatically turn on again after the power
switch is turned off and ON mode.

To manually turn on the monitor when it is turned off.
Push the "AUTO" button. The indicator should turn green.
CT200h_OM_OM76102E_(EE)