Lexus CT200H Manual page 147


A sudden approach to the effective range or door handle may prevent the doors
from being unlocked. In this case, return the door handle to the original position
and check that the doors unlock before pulling the door handle again.

If there is another electronic key in the detection area, it may take slightly lon-
ger to unlock the doors after the door handle is gripped.

Fingernails may scrape against the door during operation of the door handle. Be
careful not to injure fingernails or damage the surface of the door.

When the vehicle is not driven for extended periods

Vehicles with entry function: To prevent theft of the vehicle, do not leave the
electronic key within 2 m (6 ft.) of the vehicle.

The smart entry & start system can be deactivated in advance. (P. 650)

To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get the
electronic key too close to the vehicle when operating the system from the out-
side of the vehicle.
Depending on the position and holding condition of the electronic key, the key
may not be detected correctly and the system may not operate properly. (The
alarm may go off accidentally, or the door lock prevention may not operate.)

If the smart entry & start system does not operate properly

Locking and unlocking the doors: Use the mechanical key. (P. 621)
Starting the hybrid system: P. 622


Customization
Settings (e.g. smart entry & start system) can be changed.
(Customizable features: P. 650)

If the smart entry & start system has been deactivated in a customized setting

Locking and unlocking the doors:
Use the wireless remote control or mechanical key. (P. 132, 621)
Starting the hybrid system and changing power switch modes: P. 622

Stopping the hybrid system: P. 197

CT200h_OM_OM76102E_(EE)
3-2. Opening, closing and locking the doors
147
3