Lexus CT200H Manual page 384

380
5-14. Using the radio (Lexus Display Audio System)

Manual tuning (manual screen)
Turn the "TUNE•SCROLL" knob or turn the controller.

Station list (preset or station list screen)
Select the desired station by pressing "<" or ">", turn the
"TUNE•SCROLL" knob or controller.
Setting station presets (preset screen)
Radio stations can be preset.
1
Search for desired stations.
2
Turn the controller to select one of the stations and then press the
controller until you hear a beep while on the preset selection screen.
Time shift operation (DAB)
The broadcast you are currently listening to can be re-listened to at any
time.
1
Move the controller to the right and then select "Time shift".
2
Turn the "TUNE•SCROLL" knob to set the desired offset.
An offset playback time can also be set on the menu screen. (P. 376)
To cancel the time shift operation while in time shift mode, move the control-
ler to the left and select "Time shift off". If the time shift display is left show-
ing "-0' 00"" for 6 seconds without any operation, the time shift operation will
be canceled.

Reception sensitivity

Maintaining perfect radio reception at all times is difficult due to the continu-
ally changing position of the antenna, differences in signal strength and sur-
rounding objects, such as trains, transmitters, etc.

The radio antenna is mounted inside the rear window. To maintain clear radio
reception, do not attach metallic window tinting or other metallic objects to the
antenna wire mounted inside the rear window.

Traffic announcement operation
When traffic announcement is set to on, "TP" will appear on the screen and the
radio will begin seeking a TP station. If the radio seeks out a TP station, the pro-
gram name will appear on the screen. If a traffic announcement station is
received, the radio will be switched to the traffic information program automati-
cally. When the program ends, the initial operation will resume.
CT200h_OM_OM76102E_(EE)