Lexus CT200H Manual page 569

Installing towing eyelets
1
Take out the towing eyelet. (P. 592, 606)
2
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the
vehicle body as shown in the illus-
tration.
3
Insert the towing eyelet into the
hole and tighten partially by
hand.
4
Tighten down the towing eyelet
securely using a wheel nut
wrench.
5
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
6
Enter the vehicle being towed and start the hybrid system.
If the hybrid system does not start, turn the power switch to ON mode.
7
Shift the shift position to N and release the parking brake.
CT200h_OM_OM76102E_(EE)
8-2. Steps to take in an emergency
565
8