Lexus CT200H Manual page 588

584
8-2. Steps to take in an emergency
Warning message
(If equipped)
(Flashes 3
times)
: For the EV drive mode operating conditions: P. 201
*
CT200h_OM_OM76102E_(EE)
Details/Actions
Indicates that the pre-crash safety system is not cur-
rently functional because the grille cover or the sen-
sor is dirty
This message also appears when the pre-crash
safety system is not functional due to overheat-
ing.
 Check the grille cover and the sensor and clean
them if they are dirty.
In case of overheating, the system will become
functional once the system cools down.
Indicates that the EV drive mode is not available
The reason the EV drive mode is not available
(the vehicle is idling, battery charge is low, speed
is higher than the EV drive mode operating speed
range, accelerator pedal is depressed too much)
may be displayed.
A buzzer also sounds.
 Use the EV drive mode when it becomes avail-
able.
Indicates that the EV drive mode has been automat-
*
ically canceled
The reason the EV drive mode is not available
(the battery charge is low, speed is higher than the
EV drive mode operating speed range, accelera-
tor pedal is depressed too much) may be dis-
played.
A buzzer also sounds.
 Drive the vehicle for a while.
*