Lexus CT200H Manual page 560

556
7-3. Do-it-yourself maintenance

Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.

Headlight low beams (LED type)

Daytime running lights and front position lights

LED front fog lights (if equipped)

Side turn signal lights

Stop/tail lights

High mounted stoplight

License plate lights

After replacing the bulbs
After removing the power control unit
cover, return the cover to original position
with the clips.
1
Push up center portion
2
Insert
3
Press

LED lights
The headlight low beams (LED type), front position lights, daytime running
lights, LED front fog lights (if equipped), side turn signal lights, stop/tail lights,
high mounted stoplight and license plate lights consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle to any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional to have the light
replaced.

Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional for more information in the fol-
lowing situations:

Large drops of water have built up on the inside of the lens.

Water has built up inside the headlight.

When replacing light bulbs
P. 537
CT200h_OM_OM76102E_(EE)