Lexus CT200H Manual page 603

Installing the spare tire
1
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel con-
tact surface, the wheel nuts may
loosen while the vehicle is in
motion, causing the tire to come off.
2
Install the spare tire and loosely
tighten each wheel nut by hand
by approximately
amount.
Tighten the wheel nuts until the
tapered portion comes into loose
contact with the disc wheel seat.
3
Lower the vehicle.
4
Firmly tighten each wheel nut
two or three times in the order
shown in the illustration.
Tightening torque:
103 N•m (10.5 kgf•m, 76 ft•lbf)
5
Stow the flat tire, tire jack and all tools.
CT200h_OM_OM76102E_(EE)
8-2. Steps to take in an emergency
Tapered por-
the same
599
Disc
wheel
8