Lexus CT200H Manual page 164

164
3-3. Adjusting the seats

Recall procedure
1
Turn the power switch to ON mode.
2
Check that the shift position is in P.
3
Press one of the buttons for the
driving position you want to
recall until the buzzer sounds.

To stop the position recall operation part-way through
Perform any of the following:

Press the "SET" button.

Press button "1", "2" or "3".

Operate any of the seat adjustment switches (only cancels seat position recall).

Seat positions that can be memorized (P. 159)
The adjusted positions other than the position adjusted by lumbar support switch
can be recorded.

Operating the driving position memory after turning the power switch off
Recorded seat positions can be activated up to 180 seconds after the driver's door
is opened and another 60 seconds after it is closed again.

In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is oper-
ated in the same direction, the recorded position may be slightly different when it
is recalled.
CT200h_OM_OM76102E_(EE)