Cisco SE-CL-L3 Installation Manual page 13

Overview
Feature
Network and management I/O
Modular LOM
Power
ACPI
Cooling
PCIe I/O
InfiniBand
Storage, front-panel
Description
Rear panel:
• One 1-Gb Ethernet dedicated management port (RJ-45
connector)
• Two 1-Gb/10-Gb BASE-T Ethernet LAN ports (RJ-45
connectors)
The dual LAN ports can support 1 Gbps and 10 Gbps,
depending on the link partner capability.
• One RS-232 serial port (RJ-45 connector)
• One VGA video connector port (DB-15 connector)
• Two USB 3.0 ports
Front panel:
• One front-panel keyboard/video/mouse (KVM) connector
that is used with the KVM cable, which provides two USB
2.0, one VGA, and one DB-9 serial connector.
One dedicated socket (x16 PCIe lane) that can be used to add an
mLOM card for additional rear-panel connectivity.
One power supply:
• AC power supplies 1050 W AC each
The advanced configuration and power interface (ACPI) 4.0
standard is supported.
Seven hot-swappable fan modules for front-to-rear cooling.
Two horizontal PCIe expansion slots on a PCIe riser assembly.
See PCIe Slot Specifications, on page 60
slots.
The PCIe bus slots in this server support the InfiniBand
architecture.
The server is orderable in three different versions, each with a
different front panel/drive-backplane configuration.
• SE-CL-L3 , Small form-factor (SFF) drives, with 10-drive
backplane. Supports up to 10 2.5-inch SAS/SATA drives.
Drive bays 1 and 2 support NVMe SSDs.
Cisco Application Services Engine Hardware Installation Guide
Summary of Server Features
for specifications of the
7