Enabling Or Disabling The Internal Usb Port - Cisco SE-CL-L3 Installation Manual

Maintaining the Server
Figure 31: Location of Internal USB Port
1 Location of horizontal USB socket on motherboard

Enabling or Disabling the Internal USB Port

The factory default is that all USB ports on the server are enabled. However, the internal USB port can be
enabled or disabled in the server BIOS.
Step 1
Enter the BIOS Setup Utility by pressing the F2 key when prompted during bootup.
Step 2 Navigate to the Advanced tab.
Step 3
On the Advanced tab, select USB Configuration.
Step 4 On the USB Configuration page, select USB Ports Configuration.
Step 5
Scroll to USB Port: Internal, press Enter, and then choose either Enabled or Disabled from the dialog box.
Step 6 Press F10 to save and exit the utility.
-
Cisco Application Services Engine Hardware Installation Guide
Enabling or Disabling the Internal USB Port
57