Overview; External Features - Cisco SE-CL-L3 Installation Manual

Overview

•
•
•
•
Overview
Cisco Application Services Engine provides a common platform for deploying Cisco Data Center applications.
These applications provide real time analytics, visibility and assurance for policy and infrastructure.
The Cisco Application Services Engine server is required for installing and hosting the Cisco Application
Services Engine application.
The server is orderable in the following version:
• SE-CL-L3 — Small form-factor (SFF) drives, with 10-drive backplane. Supports up to 10 2.5-inch
Note
The Cisco Application Services Engine software is pre-installed on the server. It is detected after the server
is connected, installed and powered on. Cisco Application Services Engine app allows you to fully enable the
capabilities of the Cisco Application Services Engine.
Cisco Application Services Engine app can be downloaded from the
Application Services Engine

External Features

This topic shows the external features of the server versions.
Cisco SE-CL-L3 (SFF Drives) Front Panel Features
The following figure shows the front panel features of the small form-factor drive versions of the server.
For definitions of LED states, see
Overview, on page 1
External Features, on page 1
Serviceable Component Locations, on page 4
Summary of Server Features, on page 6
SAS/SATA drives. Drive bays 1 and 2 support NVMe SSDs.
for more information on downloading and using the app.
C H A P T E R
Front-Panel LEDs, on page
Cisco Application Services Engine Hardware Installation Guide
1
Cisco DC App Center. See the
21.
Cisco
1