Cisco SE-CL-L3 Installation Manual page 8

External Features
Figure 1: Cisco SE-CL-L3 (SFF Drives) Front Panel
1 Drive bays 1 – 10 support SAS/SATA hard disk
drives (HDDs) and solid state drives (SSDs)
2 • SE-CL-L3 : Drive bays 1 and 2 support
NVMe PCIe SSDs.
3 Power button/power status LED
4 Unit identification button/LED
5 System status LED
6 Power supply status LED
SE-CL-L3 (LFF Drives) Front Panel Features
The following figure shows the front panel features of the large form-factor drive version of the server.
For definitions of LED states, see
Cisco Application Services Engine Hardware Installation Guide
2
7 Fan status LED
8 Network link activity LED
9 Temperature status LED
10 Pull-out asset tag
11 KVM connector
(used with KVM cable that provides one DB-15
VGA, one DB-9 serial, and two USB connectors)
-
Front-Panel LEDs, on page 21.
Overview