Replacing A Front-Loading Nvme Ssd; Front-Loading Nvme Ssd Population Guidelines - Cisco SE-CL-L3 Installation Manual

Replacing a Front-Loading NVMe SSD

Figure 17: Replacing a Drive in a Drive Tray
1 Ejector lever
2 Release button
Replacing a Front-Loading NVMe SSD
This section is for replacing 2.5-inch or 3.5-inch form-factor NVMe solid-state drives (SSDs) in front-panel
drive bays.

Front-Loading NVMe SSD Population Guidelines

The front drive bay support for 2.5-inch NVMe SSDs:
• SE-CL-L3 —Small form-factor (SFF) drives, with 10-drive backplane. Drive bays 1 and 2 support
Cisco Application Services Engine Hardware Installation Guide
34
2.5-inch NVMe SSDs.
3 Drive tray screws (two on each side)
4 Drive removed from drive tray
Maintaining the Server