Cisco SE-CL-L3 Installation Manual page 9

Overview
Figure 2: SE-CL-L3 (LFF Drives) Front Panel
1 Drive bays 1 – 4 support SAS/SATA HDDs and
SSDs
2 Drive bays 1 and 2 support NVMe PCIe SSDs.
A size-converter drive sled is required if 2.5-inch
SSDs are used.
3 Power button/power status LED
4 Unit identification button/LED
5 System health LED
6 Fan status LED
SE-CL-L3 Rear Panel Features
The rear panel features are the same for all versions of the server.
For definitions of LED states, see
7 Temperature status LED
8 Power supply status LED
9 Network link activity LED
10 KVM connector
(used with KVM cable that provides one DB-15
VGA, one DB-9 serial, and two USB connectors)
11 Pull-out asset tag
-
Rear-Panel LEDs, on page 24.
Cisco Application Services Engine Hardware Installation Guide
External Features
3