DJG Alpha Omega 65 Manual page 28

4.
Tighten the Tether Strap
With knee still in child restraint,
push down on the child restraint
again and pull on free end of the
tether strap to tighten.
5.
Check Vehicle Belt Tightness
Grasp the child restraint at the
belt path with one hand. Push
and pull the child restraint from
side to side, forward and back.
The child restraint should not
move more than 2.5 cm (1 in)
and the vehicle belt should not
loosen.
NOTE: If it moves more than 2.5
cm (1 in.) or if the vehicle belt
loosens, try reinstalling the child
restraint or try another seating
location.
6.
Secure Child in the Child
Restraint.
53
4358-5978 Alpha Omega ENG.indd 55-56 4358-5978 Alpha Omega ENG.indd 55-56
H-1 Prepare to Install Booster
Seat
18-36 kg (40-80 lb) 102-132 cm (40-52 in.)
Booster seat using only vehicle lap/shoulder belt.
You MUST remove the
harness system (see section
C-7).
You MUST remove the
lumbar support to use this
seat as a booster seat (see
section C-5).
Use only the vehicle's lap and shoulder
belt system when restraining the child in
this booster seat.
Do not use the UAS belts or the
tether strap when using as a
booster seat.
Secure both UAS and tether
strap.
Do not use the harness system when using
as a booster seat.
Do not use this booster seat
if the midpoint of your child's
ears are above the top of the
booster seat's headrest.
Failure to follow these warnings can result
in serious injury or death.
54
Lap/Shoulder Belt
continued on next page.
11/9/12 3:44 PM 11/9/12 3:44 PM