Original Setting And Copy Directions - Ricoh FT2012 Operating Instructions Manual

ORIGINAL SETTING AND COPY
ORIGINAL SETTING AND COPY
When you use the following kinds of paper, set them into the bypass feed
entrance.
.....................................................................................................................
OHP sheets
W hen you copy onto OHP
sheets, set the originals and
OHP sheets as shown on the
right.
When using OHP sheets, set one
sheet at a tim e into the bypass
feed entrance and open the copy
tray. Rem ove copies delivered to
the copy tray one by one.
.....................................................................................................................
Letterhead
When you copy onto letter-
head, set the originals and let-
terhead as shown on the right.
.....................................................................................................................
Two-sided copies
W hen you m ake tw o-sided
copies, set the originals and
copy paper for copying the re-
verse side as shown on the
right.
Do not use paper that has been
copied onto by other machines.

ORIGINAL SETTING AND COPY DIRECTIONS

DIRECTIONS
DIRECTIONS
Front side
Front
side
11