Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual page 73

Figure 24: Inserting the server onto the rack rails
Ê Fully extend the rack rails until they lock in place (1).
I
The rack rails must click into place so that they can no longer be
moved.
Ê At a slight angle, lower the server onto the rear mounting point on the rack
rails (2).
Ê Fold down the server (3). Ensure that all six rack mounting bolts are properly
seated in the mounting points on the rack rails and that the locking bars
engage (4).
TX2550 M4 Upgrade and Maintenance Manual
Basic hardware procedures
73