Table of Contents
Advertisement
System board and components
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
Ê Disconnect all external cables.
Ê Remove the PSUs, see section
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
"Removing the PCI air duct" on page 86
Ê
Ê Remove all expansion cards, see section
I
Before removing the expansion cards, take a note on the installation
slot number for each card. Make sure that you reinstall the card in the
slot it was located before the replacement.
Ê If applicable,
"Removing the riser module" on page 84
"Removing the crossbar" on page 88
Ê
Ê Remove the fan bridge, see section
Ê Remove all memory modules, see section
page
352.
I
Before removing the memory modules, take a note on the installation
slot number for each memory module. Make sure that you reinstall
the memory modules in the slot they were located before the
replacement.
Ê Remove the OCP module (if applicable), see section
module" on page
Ê Remove the iRMC microSD card (if applicable), see section
iRMC microSD card" on page 429
Ê If applicable, remove all M.2 SSDs, see section
page
436.
452
"Removing a PSU" on page
307.
Upgrade and Maintenance Manual
"Expansion cards" on page
"Handling fan bridges" on page
"Removing memory modules" on
"Removing the OCP
"Removing the M.2 SSD" on
145.
312.
90.
"Removing the
TX2550 M4
Advertisement
Table of Contents
