Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Ê If applicable, remove all cables from the slimline ODD.
Ê Disengage the accessible drive locking bar, see section
accessible drive locking bar" on page
Figure 167: Removing the HDD extension box
Ê Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
Ê Engage the locking bar, see section
bar" on page 96.
7.5.6.3

Installing accessible drive dummy covers

Ê Install accessible drive filler covers into empty drive bays, see section
"Installing accessible drive filler covers" on page
Ê Install accessible drive covers into the front cover, see section
accessible drive covers" on page
256
94.
"Closing the accessible drive locking
101.
Upgrade and Maintenance Manual
"Opening the
99.
"Installing
TX2550 M4