Front panel
Figure 291: Opening the accessible drive locking bar
I
The front cover (floorstand model) / rack front cover (rack model) does
not need to be removed in order to replace the front panel module. In the
figures, the front cover / rack front cover has been removed for illustration
purposes only.
Ê Pull up the locking latch to disengage the accessible drive locking bar (1).
Ê Fold out the accessible drive locking bar (2).
Figure 292: Removing the front panel module
Ê Pull out the front panel module.
408
Upgrade and Maintenance Manual
TX2550 M4