Removing The 8X 2.5-Inch Hdd Front Panel; Removing The 2.5-Inch Hdd Bay Top Cover; Installing The Second 2.5-Inch Hdd/Ssd Sas Backplane - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)

7.3.13.2 Removing the 8x 2.5-inch HDD front panel

Figure 128: Removing the 8x 2.5-inch HDD front panel
Ê Remove four screws from the 8x 2.5-inch HDD front panel.
Ê Pull up the 8x 2.5-inch HDD front panel to disengage it from the chassis.
Ê Remove the 8x 2.5-inch HDD front panel.

7.3.13.3 Removing the 2.5-inch HDD bay top cover

Ê Remove the 2.5-inch HDD bay cover, see section
HDD bay top cover" on page

7.3.13.4 Installing the second 2.5-inch HDD/SSD SAS backplane

Ê Install the second 2.5-inch HDD/SSD SAS backplane and the second HDD
cage, see section
page 191.
210
186.
"Installing a 2.5-inch HDD/SSD SAS backplane" on
Upgrade and Maintenance Manual
"Removing the 2.5-inch
TX2550 M4