The Support Table; Assembling The Support Table; Support Table Packaging - Barco VRWF-3200 System Installation Manual

A. THE SUPPORT TABLE
Packaging
1
2
3
Image A-1

support table packaging

1 BVS profiles 491 mm (4x)
2 BVS profiles 600 mm (4x)
3 BVS profiles 746 mm (4x)
4 feet (4x)
5 floor fixation brackets (4x)
6 projector box fixations (2x)
- bolts and corners
A.1 Assembling the support table
Necessary parts
• 746 mm profiles (4x)
• 600 mm profiles (4x )
• 491 profiles (4x)
• corners (32x)
• T-bolts M8x25 (64x)
• T-bolts M8x20 (20x)
• feet(4x)
• floor fixation brackets (4)
• projector box fixations (2)
How to assemble the profiles and the corner pieces ?
1. Place the BVS profiles (the profiles of 746 mm and 600 mm ) and the fix all the corner pieces with the delivered M8x25 T-bolts
(image A-2)
2. Place the other profiles as indicated and tighten with the M8x25 T-bolts (image A-3)
3. Place the corner pieces as indicated (at the inside of the angles formed by the profiles) (image A-4)
R5976989 BARCO VR WORKROOM 22/09/2006
4
5
6
A. The support table
53