Connecting The Sources; Typical Setup - Barco VRWF-3200 System Installation Manual

7. Connections
Image 7-2

Typical setup

This setup is only an example, the iCon allows multiple input possibilities. See the owners manual for more
detail.
In a front configuration the Master projector is the projector visible through the glass bottom part.
In a rear configuration the Master projector is the bottom projector.
7.2

Connecting the sources

How to connect the stereo source ?
1. Connect the left stereo channel of the stereo source to the Layer 1 RGB input of the Slave projector (image 7-3)
2. Connect the right stereo channel of the stereo source to the Layer 2 RGB input of the Master projector
32 R5976989 BARCO VR WORKROOM 22/09/2006