2. Press → to select Installation
3. Press ↓ to Pull down the menu
8.1.4
Firewall settings
Introduction
The Windows Firewall will not allow the Slave to take over the desktop of the Master. To solve this, one can disable the Windows
Firewall or define the desktop integration program as an exception for the Firewall.
Both methods are explained below.
procedure must be performed on both projectors (Master rand Slave)
How to disable the Windows Firewall ?
1. In the Control Panel select the network connection and open the Change Windows Firewall settings dialog box.
or, rightclick on the network-icon in the system tray and select Change Windows Firewall Settings (image 8-5, image 8-6)
A dialog box is displayed (image 8-7)
2. Put the Firewall off by checking the Off check box
Image 8-5
Windows Firewall settings via system tray
Image 8-6
R5976989 BARCO VR WORKROOM 22/09/2006
8. Setup
39