8. Setup
6. A dialog box is displayed
See image 8-4.
7. Select ON for the "Projector standby state" and the "Projector On" state
Image 8-3
Image 8-4
C
AUTION
8.1.3
Projector communications settings
RS232 settings
The RS232 port of the master server is connected to the RS232 port of the slave projector. The slave RS232 settings have to be
set in the slave projector.
The slave RS232 settings can be found in the slave projector's Installation menu.
Following items can be set :
•
Baud rate
•
Projector address
Setting
Baudrate
Address
How to access the Installation menu ?
1. Press MENU to activate the Tool bar
38
:
The "Projector On status" should always be ON !
Default value
115200
2
R5976989 BARCO VR WORKROOM 22/09/2006