Lamp Replacement; Rear Cover Removal - Barco VRWF-3200 System Installation Manual

10.2 Lamp replacement

Lamp replacement
The projector lamps can be accessed from the rear side of the assembly. This is the case for both systems (rear and front). For the
front system, however, a plate has to be removed.
Image 10-7
Necessary tools
Allan key (M8)
How to access the projector's rear section ?
1. Loosen the 8 screws and remove the rear plate (image 10-8)
2. The projector rear cover can now be removed (image 10-9)
Warning: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.
Image 10-8

Rear cover removal.

R5976989 BARCO VR WORKROOM 22/09/2006
10. Maintenance
51