Accessories - Siemens SIMATIC HMI IRD400 Operating Instructions Manual

Display and LEDs
The LED contains three 7-segment displays, each with a decimal point.
The response of the three 7-segment displays and LEDs is defined via the configuration.
PROFINET ports and digital inputs/outputs
The display unit communicates with the controller via PROFINET. The response of the digital
inputs/outputs (pins 1...8) of the I/O interface X10 is defined via the configuration of the slots
in HW Config (TIA Portal) and is freely-programmable.
1.4

Accessories

Accessories for the display unit:
● IR remote control
The IR remote control represents the input device for the display unit. The article number
is 6ES7292-0CA50-0AA0.
Accessories can be found on the Internet (https://mall.industry.siemens.com).
IRD400
Operating Instructions, 05/2018, A5E36790512-AC
Overview
1.4 Accessories
9